Large Flow Clean Water Axial Flow Pump 700m3/h-30000m3/h Cast Iron / Stainless Steel

Large Flow Axial-Flow Propeller Pump High Efficiency Turbine Connecting Parts

Axial-flow pump description

An axial flow pump is a pump that uses the force generated by the rotating impeller blades to transport liquid in the axial direction. There are several types of vertical, horizontal, inclined and tube pumps. The special thrust bearing is adopted, with reasonable structural design, sufficient lubrication, good heat dissipation, long service life of the bearing, remote control and automatic control, saving time and labor for installation and maintenance, and saving costs. It is mainly suitable for low water head and high flow conditions, such as irrigation, drainage, dock drainage, water level regulation of channel locks, or as a large circulating water pump in power plants. High-head axial flow pumps (two-stage if necessary) for waterjet propulsion of shallow water vessels.

Axial-flow pump Specification

Axial-flow pump Matters Needing Attention

During the test run of the axial flow pump, the connecting parts should be checked to ensure that the connecting parts are not loose.
The electrical appliances and instruments of the axial flow pump should work normally; the pipelines of oil, gas and water systems should have no leakage; check whether the pressure and hydraulic pressure are normal.
Regularly check whether there are floating objects near the water inlet to prevent blockage.
The temperature of rolling bearings in axial flow pumps should not exceed 75°C. The temperature of the oil in the gearbox should be normal.
Pay attention to the sound and vibration of the water pump at any time, and stop it immediately for inspection if any abnormality is found.

Axial Flow Pump 30000m3/H

Axial Flow Pump 700m3/H

Large Flow Axial Water Pump

Large Flow Clean Water Axial Flow Pump 700m3/h-30000m3/h Cast Iron / Stainless Steel Images